|
|
|
|
Home / Computers / Computer Certification
Cisco CCNP / BCMSN Exam Tutorial: Changing The Active Router In HSRP
By:Chris Bryant, CCIE #12933
To pass the BCMSN exam and earn your CCNP certification, you've got to know HSRP inside and out. While the operation and basic commands of HSRP are pretty simple, there are some important details that are easily overlooked but are vital in getting HSRP to work the way you want it to. Let's take a look at using the priority command correctly on both the exam and in production networks.
A key value in the show standby command is the priority. The default is 100, and the router with the highest priority will be the primary HSRP router. We'll raise the default priority on R2 and see the results. R3 is currently the Active router and R2 the standby, so let's raise the priority on R2 and see what happens.
R2(config)#interface ethernet0
R2(config-if)#standby 5 priority 150
R2#show standby
Ethernet0 - Group 5
Local state is Standby, priority 150
Hellotime 4 sec, holdtime 12 sec
Next hello sent in 0.896
Virtual IP address is 172.12.23.10 configured
Active router is 172.12.23.3, priority 100 expires in 8.072
Standby router is local
1 state changes, last state change 00:14:24
R2 now has a higher priority, but R3 is still the active router. R2 will not take over as the HSRP primary until R3 goes down - OR the preempt option is configured on R2.
R2(config-if)#standby 5 priority 150 preempt
1d11h: %STANDBY-6-STATECHANGE: Ethernet0 Group 5 state Standby -> Active
R2#show standby
Ethernet0 - Group 5
Local state is Active, priority 150, may preempt
Hellotime 4 sec, holdtime 12 sec
Next hello sent in 1.844
Virtual IP address is 172.12.23.10 configured
Active router is local
Standby router is 172.12.23.3 expires in 10.204
Virtual mac address is 0000.0c07.ac05
2 state changes, last state change 00:00:13
In just a few seconds, a message appears that the local state has changed from standby to active. Show standby confirms that R2, the local router, is now the active router - the primary. R3 is now the standby. So if anyone tells you that you have to take a router down to change the Active router, they're wrong - you just have to use the preempt option on the standby priority command.
Another vital part of HSRP configurations is knowing how to change the MAC address of the virtual router, as well as interface tracking. We'll look at those features in the next part of my HSRP tutorial!
Article Source: http://www.dailynewarticles.com
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNP and CCNA tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages.
You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website.
For a FREE copy of his latest e-books, “How To Pass The CCNA” and “How To Pass The CCNP”, just visit the website! You can also get FREE CCNA and CCNP exam questions every day! Get your CCNP certification with The Bryant Advantage!
More Articles from Computer Certification Category:
Cisco CCNP Certification / BCMSN Exam Tutorial: Writing QoS Policy
Cisco CCNP / BCSI Exam Tutorial: Configuring EIGRP Packet Authentication
Cisco CCNP / BSCI Certification: Introduction To ISIS Terminology
What To Expect When Taking Your First Cisco Certification Exam
Cisco CCNA / CCNP Home Lab: Why You Need An ISDN Simulator
Be Certifiable! The Basics Of MCSE And MCP
Cisco CCNP / BCSI Exam Tutorial: Broadcasts And The IP Helper-Address Command
Webroot Window Washer
Cisco CCNA / CCNP Home Lab Tutorial: Using 2520 Routers
CCNA / CCNP Home Lab Tutorial: The VLAN.DAT File
Cisco CCNP / BCMSN Exam Tutorial: Changing Root Bridge Election Results
CCNP Certification / BCMSN Exam Tutorial: HSRP MAC Addresses And Timers
Cisco CCNP / BCMSN Exam Tutorial: Switches, QoS, And Cisco's Networking Model
Cisco CCNA Exam Tutorial: Troubleshooting Directly Connected Serial Interfaces
How To Earn Cisco’s Firewall Specialist Certification
|
|
