|
|
|
|
Home / Cars and Trucks / Motorcycles
Making your Harley Faster, Louder, and more Powerful with Custom Motorcycle Parts
By:Christine Harrell
If you want to turn your average chopper into a loud, roaring, customized machine, there are a few custom motorcycle parts that can make a big impact. The aftermarket custom motorcycle parts listed here are generally in the $150 to $500 range and don’t require a degree from the Jesse James School of custom bike building to install. Take a look at these simple modifications that can make a big difference in sound, and performance of your Harley.
Big Growler Exhausts:
What’s a chopper if it doesn’t rumble? The Big Growler Exhaust system will turn the heads of even those sealed inside their super luxury cars, and make them wish they had the freedom a burley Harley. The long straight pipe makes this exhaust system “un-muffled” amplifying every hum and grind of the engine as it accelerates and cruises. When it comes to custom motorcycle parts, the couple hundred dollars for the exhaust is a great value.
Yost Power Tube:
One way to get a lot of power with custom motorcycle parts for a little cash is with the Yost Power Tube. More power comes from increased combustion efficiency and there’s no better way to achieve this than with the Power Tube. The kit from Yost includes a spacer for even greater power and throttle. The power tube works with all of the S&S Series B, E, & G Harleys and is one of the custom motorcycle parts that most weekend bike enthusiasts can install themselves.
Spyke Ignitions:
An ignition kit is another of the inexpensive custom motorcycle parts that makes a big impact. Spyke aftermarket ignitions have more power than the factory ignition, dyno-proven power gains, and aggressive ignition curves. This aftermarket part also reduces kickback and strain and allows for customized timing based on engine modifications.
Carburetors:
After market carburetors are another one of the first aftermarket parts people modify on their Harley. The job of the carburetor is to mix the right amount of gas with air to produce the torque that fuels the bike. Too little gas and the engine runs lean, too much gas and the engine will flood. The Mikuni is one of the most effective for pulling in air among the aftermarket carburators. More air flowing through means more peak power.
Once you get started modifying your bike with aftermarket custom motorcycle parts, you’ll most likely find scores of other projects to fill your time. In a lot of cases, the custom motorcycle parts produced by aftermarket companies surpass the look and performance of stock parts. Modifying the engine, ignition, and exhaust is a great place to start to make big changes to your stock bike. Later, with modifications to the handlebars, mirrors, gas tank, tires, and paint job can create a completely unique looking bike with a lot of power, speed, and noise.
Article Source: http://www.dailynewarticles.com
Author is a writer for Jireh Cycles which specializes in custom motorcycle
parts. For additional information you can visit http://www.JirehCycles.com.
More Articles from Motorcycles Category:
Repairing Flat Tires On A Scooter
Repairing The Headlights On A Scooter
Maintaining The Seat Of A Scooter
Scootie Jr The Scooter For Mobility And The Small Budget
Scooters A Versatile And User Friendly Mobility Device
Take A Vacation Like This On Your Motorcycle
Why Should You Wear A Helmet When You Ride Your Motorcycle
How To Buy Protective Motorcycle Clothing That Does More Than Just Look Good
Some Ways To Make Your Harley Match Your Personality
Aftermarket Motorcycle Parts or OEM parts?
Making your Harley Faster, Louder, and more Powerful with Custom Motorcycle Parts
Motorcycle Accident Trends in the US
Motorcycle Road Trips in North Florida
Safety Tips for Pocket Bikes
Electric Scooter Safety and Riding Tips
|
|
